Metal Conduit Connector With Strain Relief
Introduction of US/USP Metal Connector
USPZ
| Material | The outer metal is nickel-plated brass; The seal is modified rubber;Core retainer PA6, ferrule SUS 304, the bushing is TPE |
| Protection degree | IP65 |
| Temperature Range | Min-40℃,Max100℃,Short-term120℃ |
Tech Specification
| Article no. | Thread | clamping | GL | Wrench size | Fits to tubing size | Packet |
| USPZ-P | mm | mm | mm | (Nominal inner)mm | units | |
| USPZ-P07/Φ6 | P07 | 3～5.5 | 6 | 18/17/14 | Φ6 | 25 |
| USPZ-P09/Φ8 | P09 | 4～7 | 7 | 20/19/17 | Φ8 | 25 |
| USPZ-P11/Φ10 | P11 | 5～9 | 7 | 24/23/20 | Φ10 | 25 |
| USPZ-P13.5/Φ12 | P13.5 | 6～11 | 7 | 26/26/22 | Φ12 | 25 |
| USPZ-P16/Φ15 | P16 | 8～14 | 7 | 30/30/24 | Φ15 | 25 |
| USPZ-P21/Φ20 | P21 | 13～18 | 8 | 36/34/30 | Φ20 | 10 |
| USPZ-P29/Φ25 | P29 | 18～23 | 8 | 45/40/40 | Φ25 | 10 |
| USPZ-P36/Φ32 | P36 | 22～30 | 9 | 55/52/50 | Φ32 | 5 |
| USPZ-P42/Φ38 | P42 | 30～35 | 9 | 60/58/58 | Φ38 | 5 |
| USPZ-P48/Φ51 | P48 | 37～44 | 10 | 75/75/65 | Φ38 | 2 |
| Article no. | Thread | clamping | GL | Wrench size | Fits to tubing size | Packet |
| USPZ-M | mm | mm | mm | (Nominal inner)mm | units | |
| USPZ-M12/Φ6 | M12×1.5 | 3～5.5 | 6 | 18/17/14 | φ6 | 25 |
| USPZ-M16/Φ8 | M16×1.5 | 4～7 | 7 | 20/19/18 | φ8 | 25 |
| USPZ-M18/Φ10 | M18×1.5 | 5～9 | 7 | 24/23/20 | φ10 | 25 |
| USPZ-M20/Φ12 | M20×1.5 | 6～11 | 7 | 26/26/22 | φ12 | 25 |
| USPZ-M20/Φ15 | M20×1.5 | 6～12 | 7 | 30/28/24 | φ15 | 25 |
| USPZ-M22/Φ15 | M22×1.5 | 8～14 | 7 | 30/30/24 | φ15 | 25 |
| USPZ-M24/Φ15 | M24×1.5 | 8～14 | 7 | 30/30/27 | φ15 | 25 |
| USPZ-M25/Φ15 | M25×1.5 | 8～14 | 7 | 30/30/28 | φ15 | 25 |
| USPZ-M25/Φ20 | M25×1.5 | 13～18 | 7 | 36/34/30 | φ20 | 25 |
| USPZ-M32/Φ20 | M32×1.5 | 13～18 | 8 | 36/34/36 | φ20 | 10 |
| USPZ-M32/Φ25 | M32×1.5 | 15～22 | 8 | 45/40/36 | φ25 | 10 |
| USPZ-M36/Φ25 | M36×2.0 | 15～22 | 8 | 45/45/40 | φ25 | 10 |
| USPZ-M40/Φ32 | M40×1.5 | 22～30 | 9 | 55/52/45 | φ32 | 5 |
| USPZ-M48/Φ32 | M48×2.0 | 22～30 | 9 | 55/52/55 | φ32 | 5 |
| USPZ-M40/Φ38 | M40×1.5 | 22～32 | 9 | 60/58/50 | φ38 | 5 |
| USPZ-M50/Φ38 | M50×1.5 | 30～35 | 9 | 60/58/55 | φ38 | 5 |
| USPZ-M56/Φ38 | M56×2.0 | 30～35 | 9 | 60/58/60 | φ38 | 2 |
| USPZ-M50/Φ51 | M50×1.5 | 30～38 | 9 | 75/75/55 | φ51 | 2 |
| USPZ-M60/Φ50 | M60×1.5 | 37～44 | 10 | 75/75/70 | φ51 | 2 |
USPZAL
| Material | The outer metal is nickel-plated brass; The seal is modified rubber;Core retainer PA6, ferrule SUS 304, the bushing is TPE |
| Protection degree | IP65 |
| Temperature Range | Min-40℃,Max100℃,Short-term120℃ |
Tech Specification
Advantages of Inner Connector
Higher safety performance, simple structure, small footprint, convenient installation, etc.
Pictures of Connector
Application of Connector
It can be used in pipes that require sufficient flexibility to prevent vibration in the piping.
